Realiable pinching of seam
Easy installation
Overhead installation without any danger
Auxihiaries can be re-used
Fewer problems when stud-welding
Lower energy consumption
Less trimming work
Fewer places to trim, i.e. clean connections.
Full penetration welding with inert gas pistol is possible
Notch made after your choice
| Designation | Part No | Measurement | Notch typical | Fig. |
| BR 100 | 90 20 00 | 280x40x100 | -------- | 4 |
| BR 100/35 | 90 20 01 | 280x40x100 | 45x35 | 4 |
| BR 100/55 | 90 20 02 | 280x40x100 | 65x55 | 4 |
| BR120 | 90 20 03 | 280x40x120 | -------- | 3 |
| BR120/55 | 90 20 04 | 280x40x120 | 65x55 | 3 |
| Angle | 90 25 01 | 280x280x120 | ------- | 5 |
| Designation | Part No | Measurement | Notch typical | Fig. |
| BR 120/2 | 90 20 05 | 560x40x100 | --------- | 2 |
| BR 120/3 | 90 20 06 | 840x40x100 | 45x35 | 1 |
| BR 120/2 | 90 20 07 | 560x40x100 | 65x55 | 2 |
| BR140/3 | 90 20 08 | 840x40x120 | -------- | 1 |
| BR120/55 | 90 20 04 | 120x40x120 | 65x55 | 2 |
| DABOTEK Threaded studs: | |
| Type | force |
| MP 8x140-160 | 7400 N |
| MP10x140-160 | 11800 N |
| MP12x140-160 | 17200 N |
| MP16X140-180 | 33100 N |
